O-Sense
The long-awaited AS-T10G3 is here due to popular demand. ASUSTOR Inc. today launched the AS-T10G3 10GbE network card that includes M.2 slots for NVMe SSDs. The AS-T10G3 fits in a variety of ASUSTOR NAS devices, including, but not limited to the Lockerstor Gen2 series and Lockerstor rackmount devices and upgrades your NAS to 10-Gigabit Ethernet. With the inclusion of dual M.2 slots for NVMe SSDs, the AS-T10G3 brings nothing but speed. The combination of high speed and efficiency helps studios and enterprises take advantage of the performance benefits to increase work efficiency.
The AS-T10G3 uses the Marvell AQC113 10GbE network controller and supports two M.2 NVMe SSD expansion in addition to 10-Gigabit Ethernet. The 10-Gigabit Ethernet port is an 8P8C connector, commonly called RJ-45, enabling the ability to use copper patch cables. Reach speeds of up to 1171 MB/s when reading and write data as fast as 1119 MB/s. The AS-T10G3 is also backwards compatible with slower network standards, including 5GbE, 2.5GbE, Gigabit and 100MbE. The included aluminum heatsink provides excellent heat dissipation for the SSDs so that SSDs remain at the top of their game at all times. A Lockerstor Gen2 expansion bracket is pre-installed on the AS-T10G3 and the box arrives with full-height half-height brackets to support the wide range of ASUSTOR devices, ensuring enterprises and studios can upgrade their workflow with the full range of ASUSTOR equipment.
This AS-T10G3 has a two-year warranty.
For detailed purchase information, please contact global distributors or the ASUSTOR Parts Center.
For more information, please visit:https://www.asustor.com/
Specifications:
- IEEE 802.3an. 10GBase-T Ethernet
- IEEE 802.3ab 1GBASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3bz NBASE-T
- IEEE 802.3az Energy Efficient Ethernet
- IEEE 802.3x flow control
- IEEE 802.1Q Tagged VLAN support
- IEEE 802.1Qav Audio Video Bridging
- IEEE 1588 v2 Precision Time Protocol (PTP, Precision Time Protocol)
- Maximum data transfer rate: 10 Gbps
- Network operation mode: full duplex
- Host bus interface: PCIe 3.0 x4
- Storage interface: NVMe
- Support size specification: 2280
- Interface type and quantity: M-key, 2 slots
- Bracket support: Lockerstor-specific bracket preinstalled, full-height and half-height brackets included.
- Working temperature: 0 – 40°C
- Storage temperature: -20 – 60°C
- Relative Humidity: 5% to 95% RH
- Certifications: FCC, CE, UKCA, BSMI, VCCI, C-Tick, KCC
- Supported features:
- Jumbo Frame 16 KB
- IP, TCP, UDP checksum offload
- Supports 10/100/1000/2500/5000/10000 auto-negotiation.
- Software requirements: ADM 4.2 or above
- Hardware requirements: Lockerstor 4 & 6 Gen2, Lockerstor 4RD, RS & 12RD, Lockerstor 12RD Pro & 16RD Pro
- Product Warranty: 2 years
- Dimensions: 20.6 x 153.1 x 68.9 mm
