THE NIC L32

The heatsink of the NiC L32 is 160mm height, 150mm in width and 40mm in length.

The body of the NiC L32 is made by a total of 50 aluminum fins.

Part of the fins is turned inwards to keep air from leaking from both sides.

You can place a second thin 140mm fan at the rear of the heatsink in push & pull.

The three 6mm copper heatpipes are nickel plated and pass through all 50 fins of the heatsink.

Well this isn't the first time we see direct contact heat-pipes so no mirror like finish for the L32.

The 140mm PWM fan can spin up to 1800RPM to produce 104.4CFM of airflow with 38.4dBA of noise.

With the 140mm fan installed the NiC L32 is now 65mm thick.