THE NINJA 4

The 780g heavy Ninja 4 is quite massive (looks great however) and measures 155mm in height, 130mm in width and 130mm in depth.

The heatsink features a Shuriken design (easy to see from above) and has a large hole in the middle used to attach the mounting bracket with the bundled screwdriver.

Unlike most similar solutions the heatsink just has a total of 37 aluminum fins.

It may not draw much attention but the center of the heatsink is designed in such a way which should increase airflow.

The six 6mm nickel plated all-copper heatpipes pass through every single fin.

Scythe has given the all-copper base of the Ninja 4 a mirror-like finish.

The GlideStream 120 PWM fan bundled with the Ninja 4 features grooved fan blades for reduced air resistance and can spin up to 1500RPM (+-10%) to produce airflow levels of up to 84.64CFM with just 29.5dBA of noise.

If you decide to plug the fan into a 3pin connector you can control its speed via the built-in 3-way controller (high/medium/low).

With the 120mm PWM fan attached the Ninja 4 measures 155mm in height, 130mm in width and 153mm in length.