THE H115I PRO RGB

Yes once again we see the usual radiator/tubes/pump/waterblock combo but just like with the H150i Pro RGB the H115i Pro RGB seems to be a quality product.

According to our tool the radiator is exactly 29mm (the extra 0.3mm could be a calibration issue).

Just like the radiator used in the H150i Pro RGB this one also has an FPI (fins per inch) count of 21.

Again just like with the H150i Pro RGB the H115i Pro RGB is equipped with two 350mm long black sleeved tubes.

CORSAIR has placed their logo ontop of the pump/waterblock combo (an RGB LED is placed right beneath it).

A micro USB port which needs to be connected to your mainboard USB header (for the LINK software to work) is located at the front of the base.

The tubes used with the H115i Pro RGB can rotate up to roughly 100 degrees from the base (exactly like the ones used in the H150i Pro RGB).

The all copper base (coldplate) has quite a few visible machine marks on it and as you can see it comes ready with a pre-applied layer of thermal conductive material on it.

In terms of connectors the H115i Pro RGB has two four-pin (PWM) fan connectors, one SATA power connector and a three-pin fan connector for the pump.

Just like with the H150i Pro RGB the H115i Pro RGB is bundled with fans from the "regular" (non RGB) ML line by CORSAIR.

With both fans installed the H115i Pro RGB is good to go.

Worth pointing out is that with both fans mounted the thickness of the H115i Pro RGB jumps to almost 55mm.