THE RAYSTORM PRO X4 PHOTON AX360

The high build quality of the 406mm long, 128mm wide and 40mm thick AX360 is very easy to notice even just by looking or holding the radiator.

The XSPC logo is placed on both sides of the frame.

Compared to other models we've seen in the past again by XSPC that have a total of three ports the AX360 has just two chrome plated G1/4" ports at the top end as seen above.

Unfortunately the radiator has no protection plates so you should pay extra attention while mounting it to avoid damaging its fins.

Due to its rather high liquid capacity of 410ml the X4 Photon 170 Reservoir/Pump combo measures no less than 227.6mm in length, 87mm in width and 92mm in height.

As you can all see the pump is located at the base of the reservoir (SATA power connector) and right above it we see 3 G1/4" ports.

A large fill hole/port is placed at the top of the reservoir.

The RayStorm Pro waterblock consists by three parts the top aluminum bracket, acrylic inserts and the main copper body (center top/bottom).

Its copper base has several machine marks on it while the two holes placed on both sides (here you can see one) are where you put the two white LEDs.

The three Pro 120mm fans may not be something special in terms of design but they come with their own metal grills and can reach speeds of up to 1650RPM (+-10%) to produce up to 65.2CFM of airflow and 1.8mmH2O of static pressure with just 29dBA of noise.