THE DEEBOT T9

The DEEBOT T9 measures 353mm in diameter and 93mm in height thus landing it next to most robot vacuums out there.

As you can see from the above picture the DEEBOT T9 is almost identical to the DEEBOT N8 PRO+.

At the top of the enclosure, we find the laser mapping sensor and the secondary on/off button.

Under the top compartment we find the dust bin, cleaning tool, primary on/off slider, reset button and the WiFi activity LED.

The 420ml dust bin used with the DEEBOT T9 should be more than just enough for most houses.

As with other high-end models the DEEBOT T9 has sensors both at the front and its sides.

The air freshener module gets attached at the rear of the robot vacuum.

To use the air freshener module just place the air freshener capsule inside the round compartment located on the far left and just mount the module back onto the DEEBOT T9.

Turning the DEEBOT T9 over we see the same build quality as with th N8 PRO+ model.

Here we see two large rubberized side wheels, main round wheel, main roller brush, two openings complete with covers used by the auto-empty station, charging contacts and the two side brush positions.

Attaching and removing the side brushes is very easy and as for quality these are some of the best, I've seen used with a robot vacuum (to date that is).

The water tank is loaded where the air freshener module does (so you basically have both the dust bin and the water tank installed) and even though it has just enough room for 180ml of water it does a very good job.

For good or bad the charging base is nothing special, just a regular base with a cable holder at the rear.