THE MUGEN 5 ARGB PLUS

The main body of the Mugen 5 ARGB Plus weighs roughly 780g and measures 157.5mm in height, 133mm in width and 87mm in depth/length (no fans included).

At the top we find a white shroud which is part of the ARGB lighting system (the two holes are used to mount the cooler onto the mainboard).

A total of 39 aluminum fins can be seen here as well just like with previous Mugen 5 models.

The asymmetrical design of the Mugen 5 ARGB Plus all but ensures that you will have no problem neither with mainboard components nor with the height of your memory modules.

According to Scythe the design of the fins increases airflow levels inside the heatsink resulting in improved heat dissipation.

Just like its predecessors the Mugen 5 ARGB Plus features six 6mm nickel-plated copper heatpipes.

Again, the large base features a mirror like finish as you can see from the above picture.

The 120mm FDB Kaze Flex ARGB fans bundled with the Mugen 5 ARGB Plus can reach speeds of up to 1500RPM to produce airflow levels of up to 66.47CFM with 1.67mmH2O of air pressure and 29.75dBA of noise.

Both fans are equipped with rubber pads on all four corners.

With both fans attached the Mugen 5 ARGB Plus now weighs a total of 1060g and measures 157.5mm in height, 136mm in width and 134mm in depth.