THE R5

Measuring 162.8mm in height, 140mm in width and 98mm in length the R5 is a medium to large sized cooler.

The two fans placed on both the front and rear of the R5 are XF140 HPLN (High Precision Low Noise) bearing 140mm PWM models that can reach speeds up to 1300RPM to produce up to 76CFM of airflow with 1.44mmH2O of air pressure and with just 23dBA of noise.

CRYORIG has used a heatsink that has a total of 48 aluminum fins spaced just 2mm from each other (0.4mm thick each).

As mentioned earlier you can swap the default plastic frame (white) for the bundled one (black) to match the color of the rest of your system.

Even without the frame part of the fins is bend inwards on both sides in order to improve cooling efficiency via optimal airflow.

CRYORIG has placed a hole at the top of the heatsink which goes all the way to its base and allows you to mount the R5 onto your motherboard with ease.

Using a total of six 6mm nickel plated heatpipes seems just about right for a single heatsink model.

The C1100 all copper nickel plated base may not feature a mirror like finish but it's large and flat from side to side.