THE GABRIEL

The heatsink of the Gabriel measures 120mm in length, 118mm in width and just 40mm in height while it weighs 284g.

The top piece of the heatsink features a total of 47 aluminum fins but only 32 of those extend all the way to the bottom.

Four 6mm nickel plated all-copper heatpipes leave the base of the Gabriel and pass through all 47 fins.

Although not tied to the performance of the Gabriel i always like it when manufacturers spend extra resources to further improve the appearance of their products and the DeepCool logo at the front of the lower section of the heatsink is exactly that.

The nickel plated copper base of the cooler may be flat but it doesn't feature the nice mirror like finish we happen to like.

With a total of 11 blades and a top speed of 1800RPM (+-10%) the 120mm PWM hydro-bearing fan bundled with the Gabriel can produce up to 61.93CFM of airflow with just 32.4dBA of noise.

After mounting the fan using the two wire mounts the Gabriel increases just 2mm in width (120mm), 20mm in height (60mm) and 98g in weight (382g).