THE MATTERHORN PURE

Unfortunately the bundled 120mm PWM fan is plain without any LEDs but it's quite fast and capable of reaching speeds of up to 1500RPM with airflow of 63.6CFM at 24.8dBA.

The 120mm PWM fan also comes ready with 4 anti-vibration rubber pads and a y-splitter at the end of the cable so you can attach a second PWM fan on the same mainboard connector.

Unlike most fan clips the ones supplied with the Matterhorn PURE need to be inserted just before the top aluminum fin.

For a single fan solution the Matterhorn PURE is quite large measuring 158mm in height, 100mm in depth and 135mm in width while weighing a total of 803g.

Alpenfoehn is using the typical bending of the fins to keep the air from leaving the heatsink.

There are 48 aluminum fins on the main heatsink body.

The company logo is placed on the top aluminum fin.

Of course you can add a second 120mm fan in push & pull for improved performance. Unfortunately Alpenfoehn doesn't supply a second set of mounting clips so you will have to purchase them separately.

We rarely see six 6mm all-copper heatpipes with CPU Coolers so these should boost the unit’s performance.

The copper base features a mirror like finish and is even from side to side.