O-Sense
THE EK AIO 360 D-RGB
The main body of the EK 360 AIO D-RGB is nearly identical with that of the 240 model (minus the longer radiator and tubings and the 3rd fan).
Once again EK Water Blocks has used an 27mm thick aluminum radiator (27.5mm to be exact) which this time however has an FPI count (fins per inch) of 22.
A fill/drain port can again be found at the top of the radiator (accessing it voids the warranty).
For the tri-fan 360 model EK Water Blocks has used 400mm long black sleeved low permeability tubes.
EK Water Blocks has placed their logo on top of the acrylic pump cover.
As with most AIO models in the market today both tubes can rotate up to roughly 90+ degrees from the base.
The pure copper coldplate comes ready with a thin pre-applied layer of thermal conductive material on it (since I never use the bundled thermal pastes, I removed it to fully expose the copper base).
Here you can see an exposed model of the pump (marketing material).
Each of the three EK VARDAR S 120ER RGB fans can spin up to 2200RPM to produce up to 66.04CFM of airflow and 2.89 mmH2O of air-pressure with just 36.4dBA of noise.
With both fans mounted the thickness of the radiator jumps from 27mm to just under 54mm.
Here you can see the top of the pump in all its glory.
