THE LIQUID FREEZER II 240 A-RGB

Design-wise the Liquid Freezer II 240 A-RGB is nothing we haven't seen in the past (still looks better than most AIO models).

The 38mm thick radiator used is significantly thicker compared to the similar models we see by other manufacturers.

With the fans the thickness of the Liquid Freezer II 240 A-RGB increases to roughly 63mm.

This radiator sports an FPI (fins per inch) count of roughly 15 which is good for the bundled fans.

ARCTIC has also printed their brand name on both sides of the radiator.

Each of the two P12 A-RGB 120mm fans features a total of 12 ARGB LEDs and anti-vibration rubber pieces on all four corners.

The nickel/chrome plated fittings look very nice as do the 450mm long EPDM (ethylene propylene diene monomer) coated tubes.

This is the 3d time I’ve seen a diagonal fan just over the pump and judging by previous models it does help with VRM temperatures.

Unfortunately, the tubes are not rotatable from the pump/waterblock, still thanks to their length installation is a breeze.

Just like with past models ARCTIC has equipped the Liquid Freezer II 240 A-RGB with a rather small copper coldplate which may not be "ideal" for all CPUs out there.