THE LIQUID FREEZER II 360 A-RGB

Aside the addition of a 3rd fan (and a longer radiator) the Liquid Freezer II 360 A-RGB looks identical to the 240 model i reviewed not too long ago (review here).

With its fans pre-mounted the 38mm thick radiator becomes roughly 63mm.

Typically, the company name is printed on both sides of the radiator.

All three P12 A-RGB 120mm fans feature a total of 12 ARGB LEDs each and anti-vibration rubber pieces on all four corners.

This radiator sports an FPI (fins per inch) count of roughly 15 which pretty much idea for the P12 A-RGB fans.

Shipping the Liquid Freezer II line with the fans pre-installed is a good thing since all cables are nicely routed around the fans (thus less work for you).

The 450mm long EPDM (ethylene propylene diene monomer) coated tubes really stand out compared to what we normally see.

Leaving out the fact that the tubes can't be rotated from the base the diagonal fan located just over the pump should once again help with VRM temperatures.

Just like all past models ARCTIC has equipped the Liquid Freezer II 360 A-RGB with a rather small copper coldplate which may not be "suited" for all CPUs out there.