THE PF240

There's nothing really new in terms of design compared to other AIO models, minus perhaps the top of the pump.

Even though SilverStone claims they've used an 28mm thick radiator it's more like 27mm thick (not that 1mm would make a difference).

An empty/fill port is located right next to the base of the tubings.

With a fin count (FPI) of 20 this radiator should perform quite well.

I was surprised somewhat to see that SilverStone has used two 400mm long sleeved tubes (most still use up to 350mm ones).

The top of the pump features a glass-like surface which has several ARGB LEDs underneath.

Both tubes can rotate at the base of the waterblock/pump combo to simplify installation.

The copper base was without machine marks and larger than what we see with most AIO models.

The Air Blazer 120R 120mm PWM fans can reach speeds of up to 2200RPM to produce 94CFM of airflow with 3.53mmH2O of air pressure and just 35.6dBA of noise.

Both fans also feature anti-vibration rubber pads on all four corners.

With the fans mounted the PF240 is now roughly 53mm thick and ready for testing.

My system may not be ARGB compatible but thanks to the bundled controller i wanted to showcase both its fans and pump.