THE AQUARIUS 360

With the mirror like polished top of the pump as sole exception the AQUARIUS 360 is pretty much identical to most AIO models in the market today.

At 27.10mm thickness the radiator is as AQIRYS states.

The radiator used with the AQUARIUS 360 has an FPI (fins per inch) count of 20.

At the end of the radiator, we find a fill/empty port which however is not to be used.

The 450mm long sleeved rubber tubes should be quite enough for even the largest PC towers out there.

Aside its mirror like finish the top of the pump also has the company logo beneath it along with several ARGB LEDs.

Both tubes can rotate at the base of the waterblock/pump combo to simplify installation.

The all-copper coldplate does have some visible machine marks but that’s pretty much normal.

All three 120mm PWM hydraulic bearing fans have anti-vibration pads on all 4 corners, two 3-pin ARGB mainboard connectors and a 4-pin PWM connector.

With the fans mounted the AQUARIUS 360 measures almost 52.50mm in thickness.

Even though my test system (for coolers) doesn’t support RGB/ARGB thanks to the bundled controller I can quickly showcase some of the available colors and effects of the AQUARIUS 360.