THE NANCOOL PRO 360

I was surprised to see that Apexgaming has all three 120mm ARGB fans pre-installed on the aluminum radiator (convenient for most) but other than that once again nothing really stands out.

With the fans installed the thickness of the NANCOOL PRO 360 is just over 53mm.

All three 120mm ARGB hydraulic bearing fans come with rubber pads on all corners.

There's also a fill/empty port on the far side of the radiator but it's obviously not meant to be used by end users.

The 350mm long EPDM IIR rubber braided tubes should be long enough for most PC cases, even large towers.

In terms of FIP (fins per inch) count the aluminum radiator of the NANCOOL PRO 360 sports 21.

The top of the pump/waterblock combo features a mirror like finish and beneath Apexgaming has placed several ARGB LEDs (very short video showcasing the top of the base is up on both TikTok and YouTube).

As usual both tubes rotate at their base to simplify installing the AIO.

The coldplate does have some machine marks on it but nothing that should affect efficiency in any way.