THE DRAGONFANG 360 ARGB

AIO liquid CPU coolers all follow the same basic design so the Dragonfang 360 ARGB doesn’t really stand out (and certainly not as much as the SYN 360).

The 397mm long aluminum radiator is as expected almost 27mm thick.

In terms of FPI (fins per inch) count the Dragonfang 360 ARGB radiator sports 20.

Valkyrie has once again used long fittings on the side of the radiator as seen above.

Just like with the SYN 360 the Dragonfang 360 ARGB comes with 425mm long FEP braided tubes.

The top of the waterblock/pump combo has the company logo and name beneath which lie several ARGB LEDs (quick clip will soon be up in both TikTok and YouTube).

As expected, the tubings rotate up to around 100 degrees from the waterblock/pump to simplify installation.

Even though there's a thermal paste tube bundled with the Dragonfang 360 ARGB there's a thin layer already applied on the coldplate.

Removing the layer reveals no machine markings.

The three X12E 120mm fans can reach speeds of up to 2150RPM to produce up to 80CFM of airflow with 3.14mmH2O of air pressure at just 29dBA of noise.

Aside featuring RGB LEDs these fans also have rubber coated corners.

With all three fans attached the thickness of the Dragonfang 360 ARGB increases to almost 53mm.

So, time to see just how good the Dragonfang 360 ARGB really is.