THE ML-ULTRA360

AIO liquid coolers all look the same lately and yes, that's also the case with the ML-ULTRA360, at least at first glance.

The 397mm long and 120mm wide aluminum radiator is 27mm thick just like most used with AIO liquid coolers today.

A fill/empty port is located on the far top corner of the radiator (not to be used).

With an FPI (fins per inch) count of 22 this radiator should perform well with high pressure fans.

The removable ARGB sleeves/covers placed over the 370mm long Teflon tubes don't cover their entire surface.

As with many other AIO models in the market today the top of the pump/waterblock combo features the infinity ARGB mirror effect.

Typically, the tubes can rotate up to roughly 90% from the pump/waterblock combo to simplify installation.

The copper coldplate is medium sized and has no machine marks on it.

All three fluid dynamic bearing fans have rubber pads on all 4 corners and the company name at the front and rear (this is not something I liked, looks way too simple).

With the fans installed the aluminum radiator now measures roughly 52.2mm in thickness (videos should be available on both TikTok and YouTube).