THE MAG CORELIQUID I360

AIO liquid CPU coolers look identical for the most part so in terms of looks the CORELIQUID I360 doesn't really stand out (at least not when not installed).

With the 120mm fans installed the CORELIQUID I360 is roughly 52mm thick while the aluminum radiator on its own measures just over 27mm.

All 3 high-speed 120mm fans (2350RPM / 70.7CFM / 3.61mmH2O / 32.8dBA) feature rubber pads on all 4 corners.

The aluminum radiator MSI has used this time over has an FPI (fins per inch) count of 20.

Using 400mm long nylon braided EPDM tubes means that the CORELIQUID I360 should be compatible with almost every PC case out there.

The almost 63mm tall pump and waterblock combo has the MSI logo on top right over a dual infinity mirror panel.

As expected, the tubes can rotate from the base of the waterblock for around 70 degrees (due to the pre-installed mount).

The round copper base is large enough for all current consumer CPUs.

The MSI Mystic Light software is not available unless you own an MSI motherboard (since it wasn't available in the MSI center) but at least one can still use the system diagnostics software.

The CORELIQUID I360 is compatible with ASRock’s Polychrome Sync so you can use that if you own such a motherboard like I do.