THE KUHLER H2O 950

The KUHLER H2O 950 follows the typical AIO design we've seen with many similar solutions in the past including both the 650 and the previous KUHLER line.

Compared to the KUHLER H2O 920 the 950 model features a larger pump which is mounted in front of a 120mm fan spinning between 600 and 2400RPM.

Long story short the placement of the pump allows the liquid to travel much less distance to get to the radiator something that should slightly impact performance.

The radiator of the 950 is almost twice as thick as the one of the 650 and more specifically it is 159mm in length, 120mm in width and 50mm thick.

Just like with the 650 we couldn't find a single serious dent with the radiator fins of the 950 model.

The 300mm long tubes connect the radiator to a round waterblock with the Antec logo at the top and a LED right beneath which illuminates according to the temperature of the liquid.

Both tubings can swivel up to 90 degrees to help with the installation of the cooler.

A second 120mm fan gets bundled in the box which you can (and should) use at the rear of the radiator.

With the second fan installed the KUHLER H2O 950 becomes 75mm thick.

The copper base comes ready with a pre-applied layer of thermal conductive material.