THE LIQUID FREEZER 120

Nothing new in terms of appearance since once again we see a radiator connected to a pump/base combo via two long tubes.

The Liquid Freezer 120 features a 120mm wide, 155mm tall and 49mm deep radiator which as you can all see is much thicker compared to the usual 28mm thickness models.

Fin quality is quite good and the radiator used has an FPI count (density) of 20.

The radiator is attached to the pump/base combo via two 326mm long and flexible rubber tubes.

Asetek has used one of the largest pump/base combos we've seen to date with the Liquid Freezer 120 (82x82x40mm) but unfortunately the tubes are fixed and thus you can't rotate them from the base as with other models.

Some machine marks are visible on the copper base but other than that it's smooth and even.

ARCTIC has used two 120mm PWM CFD (computational fluid dynamic) bearing fans which can spin up to 1350RPM to produce airflow levels of up to 74CFM with just 22.5dBA of noise.

One good feature these fans have is that they also have 4pin cables attached to them so you can attach both fans together with the pump and use a single 3/4pin spot (if you don't want to control their speed).

With both fans installed the radiator thickness increases to 99mm.