THE KUHLER H2O H600 PRO

 Although the H600 Pro has a more "industrial" look compared to its predecessors the end result is one we've seen many times in the past so once again we see a radiator connected to a pump/waterblock combo via two tubes.

The radiator measures 155mm in length, 120mm in width and 27mm in height (thickness).

As you can all see fin quality is very good (each fin is 0.28mm thick).

Antec has given a high density count to the H600 Pro of roughly 16FPI (fins per inch).

The Antec logo is placed on the pump and right over a blue activity LED (the pump is powered by a SATA connector).

As usual both tubes can swivel roughly 90 degrees to simplify installation.

FEP tubes may not be as flexible as PA ones but we've experienced no real problems with either type in all these years.

The copper base doesn't feature a layer of thermal conductive material so you will need to use either your own or the one that comes in the bundle.

The 7 blade 120mm PWM blue LED fan has a reported speed of up to 2400RPM (1800RPM on the box) to produce airflow of up to 78.9CFM with just 35dBA of noise.

With the 120mm PWM LED fan mounted the thickness of the radiator increases to 52mm.