THE LIQUID FREEZER 240

Once again the radiator/tubes/pump/base combination is nothing new.

The 38mm thick radiator however is not something we see a lot since most similar models feature 27mm ones.

ARCTIC has used a high density radiator so our sample features an FPI (fins per inch) count of 21.

The 326mm long rubber tubes (10.6mm in exterior diameter) are very flexible and have been used by Asetek for as far back as i can remember.

This pump/base combo is identical to what was used with the Liquid Freezer 120 model so once again it's 82mm in width and length and 40mm in height.

Unfortunately once again the tubes are fixed and thus you can't rotate them from the base as with other models.

The copper base is quite smooth and polished right from the factory.

Each of the four F12 PST fans can spin up to 1350RPM to produce airflow levels of up to 74CFM with just 22.5dBA of noise.

With all four fans installed the Liquid Freezer 240 looks quite impressive.

Of course that comes at a price since the thickness of the unit climbs to roughly 88mm.