THE AURAFLOW 240

Nothing new in terms of design compared to other AIO models, minus the pump of course.

ID-COOLING decided to use the standard 27mm thick radiator for the AuraFlow 240 (as expected really).

With a fin count of 18 the radiator should perform quite well.

The AuraFlow 240 features two 315mm sleeved tubes for extra durability.

The top of the round pump enclosure features the ID-COOLING logo (which you guess correct is RGB illuminated).

Both tubes can rotate at the base of the waterblock/pump combo to simplify installation.

The pump is powered by a SATA connector and also features a 4-pin RGB connector for compatible mainboards.

Moving to the base of the copper waterblock as you can see it has several visible machine marks on it and that was something we didn't expect.

The SF-12025-RGB 120mm PWM hydraulic-bearing fans can reach speeds of up to 1800RPM to produce 74.5CFM of airflow with 2.15mmH2O of air pressure and 35.2dBA of noise.

Both fans also feature anti-vibration rubber pads on all four corners, 4-pin mainboard connectors and 4-pin RGB mainboard connectors.

By plugging the RGB connectors of both fans and the pump to the 4-way RGB splitter cable and then connecting it to the RGB controller you can manually control the mode and color of the AuraFlow 240.

With the fans mounted the AuraFlow 240 is now roughly 53mm thick and ready for our tests.