ICUE SOFTWARE

As mentioned earlier you can download CORSAIR's iCUE software to monitor the modules and adjust their 12 CAPELLIX LEDs.

Just like with other products by CORSAIR the moment you launch their iCUE software it will detect all compatible devices, list them on the left side and check for available firmware updates (as you can see it did have one for our kit).

The first tab you will come across once you click on the module picture shows the current temperature of all installed modules.

There's also a layout tab which allows you modify the spots where you have installed the modules (if not detected properly, in our case it was however).

From the lighting effects tab, you can use one of the 17 available lighting effects and change the speed and direction of those effects.

You can also check the current timings from the timings tab (we had the RAM set at 3400MHZ during these screenshots).

The graphing tab basically logs the temperature of the modules over set periods of time.

From within the notifications tab you can set various alarms as seen from the above picture.

Once again from the dashboard drop-down menu you can monitor your entire system, RAM included.

You can enable individual LED control from the settings down-down menu (only downside is that unlike the 17 available effects it can't be saved on the modules).