THE DARK AVENGER DA601 EXTERIOR

The Dark Avenger DA601 weighs 7.8Kg and measures 500mm tall, 480mm long and 220mm wide.

Antec has used a 4mm thick tempered glass panel for the entire left side of the case.

The plastic fascia is open at the middle and has diagonal 2 RGB stripes at the top end and 2 at the bottom end.

Taking a closer look at the opening we find a mesh filter (located in front of the 120mm Prism ARGB fan).

You can remove the fascia by pulling it outwards to access the front fan/radiator area (a magnetic air-filter is present here).

As mentioned earlier here we find the single 120mm Prism ARGB fan.

The I/O is located at the top and it includes a LED button (rotates between available modes/colors), two USB 3.0 ports, on/off power button with LED, microphone and headphone jacks and the reset button.

A magnetic air-filter is also located at the top of the tower (beneath it you can mount either 3x120mm fans, 2x140mm fans or a 240/280/360mm radiator).

Turning the DA601 around we find the pre-installed 120mm fan, 7 PCI expansion slots and the PSU area.

A removable slide in/out air-filter is located at the base of the DA601.