BUILDING THE SYSTEM
As always, the purpose of this section is not to build a functional system but rather to showcase what you can expect from the case at hand in terms of interior space.
To install the PSU, you need to remove the bracket from the base, attach it onto the PSU and then put them back into the case.
Unfortunately, this is an 180mm PSU and even though you can route cables from the front and the sides it's not the ideal scenario.
Using an ATX motherboard takes most of the tray (an E-ATX motherboard may also fit but would cover part if the rubber grommets). I also installed an 240mm radiator at the top but you need to remember that it shouldn't more over 30-35mm in thickness.
With enough room for 175mm tall CPU coolers you could use pretty much any model in the market today.
You can also fit up to 350mm long graphics cards inside the POLLUX Alfa (the GTX590 used here is roughly 295mm long).