THE VIPER GX INTERIOR

Although quite small the interior of the Viper GX looks quite roomy although the green mainboard tray is what steals the show.

The 5.25" drive bays are locked with the help of special mechanisms.

Right beneath we see an empty space capable of holding up to four 3.5" drives and three 3.5/2.5" drive trays.

You can remove the steel plate that supports the four 3.5" by removing the two thumbscrews at the top and then just sliding towards the front.

The drive trays are not extremely sturdy but we had no problems with them during this review.

Although not rubber coated the 3 large holes on the mainboard tray and the very large hole beneath the CPU area should make installation of components easier.

Unlike the front 120mm LED fan the rear is plain.

For all 7 PCI expansion slots you will have to use regular screws to secure your cards in place.

At the PSU area we see four rubber feet and the 120mm spot right next to them.

From the interior we see that there's plenty of room at the top for a 240mm radiator.

Plenty of space is also available beneath the mainboard tray especially after taking into account the side panel design.