21 - 11 - 2024
Login Form



 


Share this post

Submit to FacebookSubmit to TwitterSubmit to LinkedIn

 

THE REDLINE RL05 EXTERIOR

 

 

 

 

 

 

 

 

silverstone redline rl05 7t Thanks to the red and black combo at the front and the intake-like assents the RL05 does look a bit aggressive.

 

 

silverstone redline rl05 8t

As mentioned in the introduction page the left side panel is mostly taken by an clear acrylic window.

 

 

silverstone redline rl05 9t

Although rather simple in design and made out of plastic the fascia does add to the looks of the RL05.

 

 

silverstone redline rl05 10tsilverstone redline rl05 11t
On the right side of the fascia we find two USB 3.0 ports and the headphone and microphone plugs while on the left side we see the on/off and reset buttons with the on activity and power LEDs.

 

 

silverstone redline rl05 12t

SilverStone has given the RL05 a single 5.25" optical drive bay (the USB 3.0 type-c port is placed right above it).

 

 

silverstone redline rl05 13tsilverstone redline rl05 14t
An air-filter is placed on the interior of the fascia along with two 140mm LED fans which can be replaced with a 240mm radiator.

 

 

silverstone redline rl05 15t

Unfortunately removing the fascia and placing it back on is not as easy as with other towers since there is the USB 3.0 type-c connector at the top.

 

 

silverstone redline rl05 16t

The top of the RL05 has enough room for either two 120/240mm fans or an 240/280mm radiator.

 

 

silverstone redline rl05 17t

Turning the tower around we see the 7 PCI expansion slots and the fan and PSU areas (unfortunately no fan is pre-installed here).

 

 

silverstone redline rl05 18t

The PCI expansion slots are held in place with regular screws and also feature a cover held in place with thumbscrews.

 

 

silverstone redline rl05 19t

At the base of the Redline RL05 we see four tall rubber feet and a removable air-filter.