THE VIEW 91 RGB INTERIOR

The interior of the View 91 TG RGB is very spacious and easily dwarfs most towers out in the market today.

Thermaltake has placed 6 removable drive cages capable of holding up to twelve 3.5/2.5" drives.

All of the trays feature a tool-free system for 3.5" drives (2.5" drives need to be secured with screws).

Between the drive cages and the front 140mm Riing PLUS RGB fans there's enough room for up to 60mm thick and 420/480mm long radiators.

There are 6 rubber grommets on the mainboard tray for cable management.

All 12 PCI expansion slots are held in place via regular thumbscrews (keep in mind that the PCI raiser cable for the vertical GPU mount is not included in the package).

The PSU area has enough room up to 220mm long power supply units if you use two fans or a 280mm radiator (180mm if you use three fans).

Of course in order to install regular fans and/or a radiator you will need to remove the bottom drive cage (if you remove all drive cages you can mount another 420/480mm radiator on the mainboard tray).

Moving at the rear of the tower we find two more quick release fan/radiator mounts.

If you decide to remove all 6 drive cages you can take up to 6 of the drive trays and place them behind the mainboard tray on the available mounts.

You have roughly 75mm of space between the mainboard tray and the left side tempered glass panel for cable routing.

This is what the top of the View 91 TG RGB looks from the interior.