THE LEVEL 20 GT RGB PLUS EXTERIOR

Standing 580mm tall, 592mm long and 294mm wide the 20.1Kg heavy Level 20 GT RGB Plus Full tower is a rather compact model.

Almost the entire left side is taken by a 5mm thick tempered glass panel mounted on two hinges and secured by a lock (faster and safer compared to regular thumbscrews).

The fascia is also basically a 5mm tempered glass panel which is placed in front of an air filter (you will need to remove the panel to clean the filter) and two 200mm Riing RGB Plus fans.

The I/O is located just over the fascia on both sides of the case and includes one USB 3.1 type-C port, two USB 3.0 ports, 2 USB 2.0 ports, power on/off button with LED, HDD activity LED, reset button and the usual microphone and headphones 3.5mm ports.

At the top Thermaltake has also placed a tempered glass side panel which once again is over an air-filter (same deal as the fascia) and over the removable fan/radiator mount bracket (here you can put either 3x120/140mm fans or 2x200mm fans and/or one 240/280/360mm radiator).

The right side has the 4th 5mm tempered glass panel which is also mounted on two hinges and secured by a lock.

Moving at the rear of the tower we find a 140mm Riing RGB Plus fan (can be replaced by a 120mm one need be), 8 PCI expansion slots (you can rotate the bracket system by removing the 5 screws holding it in place) and the PSU area.

At the base of the Level 20 GT RGB Plus we find 4 tall feet, long removable air-filter and a small hatch similar to the one we saw in our review of the View 71 TG (you can access the drain valve of the front mounted radiator from here).