THE VERSA J24 TG RGB INTERIOR

The Versa J24 TG RGB may not be the largest mid tower we've ever had the chance to review/test but it does very good in terms of interior space.

If you choose not to remove the drive cage located in the PSU shroud you can mount 240/280/360mm radiators at the front up to 40mm thick (roughly up to 58mm thick with the cage removed).

The PSU shroud has an opening at the front and two removable 2.5" drive trays at the top.

Both trays are made out of aluminum and as expected are very sturdy.

You can detach the drive cage located beneath the shroud by removing this screw along with the four others from the base of the tower.

The mainboard tray has a total of 4 large holes for cable management (aside the very large CPU cutout).

Taking a look from the right side of the case we see the RGB switch board for the fans, drive cage and the PSU area.

The drive trays placed in the drive cage are made out of plastic and feature tool-less secure mechanisms for 3.5" drives (for 2.5" drives you will need to use screws).