THE ENTERPRISE CAPACITY 3.5 V6 10TB

Once again we received our sample in bulk form so it's just the drive inside a clear plastic box.

The enclosure of the Enterprise Capacity 3.5 V6 10TB HDD is virtually the same as the Barracuda Pro and IronWolf drives (minus the different stickers at the top).

The top sticker includes information about the drive such as its serial and part numbers, barcodes, firmware version installed, PSID key and SBR number.

Seagate has placed a 2nd sticker at the front of the drive which you can remove to have the PSID key close to you.

Turning the drive over we see that once again all the modules are placed on the interior of the PCB for increased protection (we also see the same empty area on the right top corner which may or may not be used with an SSD module in future models).

The typical SATA power and data connectors are placed at the rear of the drive right next to 4 pins.

Seagate was kind to provide us with three Enterprise Capacity 3.5 V6 10TB hard disk drives so we can test them and see just how fast they are in RAID 0.