THE DIY SATA DOM 16GB

Measuring just 39.54mm in length, 25.28mm in width and 6.8mm in height with a weight of 6.5g the DIY SATA DOM is really tiny.

The barcode along with the serial number are placed on a very small sticker at the rear.

A two pin power connector placed on the left side is used to supply power to the DIY SATA DOM so you can either use the Molex connector found in the bundle or purchase and use a 2 pin power connector if the device you want to use it with has an empty one.

This small switch can be used to write protect the device and thus keep its contents safe.

Due to its tiny size the performance of the DIY SATA DOM is covered by SATA II standards.

The above statement may make some people think twice about just how good this product is so we felt necessary to place it right next to a 2.5" SSD and as you can see the difference is massive (roughly 10 times smaller compared to a 2.5" SSD).