DL4 FE MENUS

The first time you use the drive it will ask for you to create your very own PIN/password.

After that you will be required to enter it and choose between read & write mode (Connect) and read-only mode.

Once the drive is unlocked you will be able to see the firmware version and encryptions.

By pressing the lock disconnect option you get to a screen where you can choose to unlock the drive again (will have to enter your PIN again) or power it down.

From the drive settings menu you can change the password, switch between users, enter safeconsole mode (remote), secure erase data (zeroize drive), destroy the drive, set password perquisites, adjust the auto-lock time, enable/disable touch screen sounds, set the brightness level for the screen, enable read-only mode, change the language for the menus and perform a touch screen calibration.

Also don't forget to download and install the latest firmware update for your DL4 FE from the official DataLocker support page.