ASSEMBLY

Putting the chair together is not hard but why not show how it's done? As the manual states you need to start from the base of the chair so first you fit the 5 wheels (just push them in the holes), place the class-4 gaslift in the base and then drop the cover over it.

Next step is to secure the backrest onto the seat by using two Allen screws on each side (as seen above).

Once that's done you should place the side plastic covers (you will need the long black Allen screws with their washers for that).

With the backrest mounted onto the seat we can move forward with the next step.

Mounting the height adjustment mechanism is not hard (it has a front indication) and requires just 4 Allen screws (the green elastic bands are there to increase support while the copper clips remind us the ones used in regular sports seats).

Both armrests are height adjustable (that applies for all gaming chairs by AK Racing) so by clicking the button beneath you can raise them from 27cm up to 34cm.

You can also adjust the angle of the backrest via a long lever found on the left side of the chair (much like a handbrake). Unfortunately we can't showcase the maximum angle on our photo bench.