ASSEMBLY

Once again we started assembling the chair from the base so the first thing was to mount the five 75mm wheels.

75mm large wheels are not common with gaming chairs but we like them.

Next we mounted the class-4 gaslift with its plastic cover (some gas lifts have small caps at the top which need to be removed).

The seat of the X-Fit features two extra metal flat bars and two green elastic bands for increased durability and support.

Each of the two 4D armrests is secured onto the seat with a total of 4 Allen screws (8 in total).

Another 4 Allen screws are required to secure the Z-support mechanism onto the seat (the plastic levers are already mounted so you don't need to worry about them coming off).

There are two Allen screws mounted on each side of the backrest along with a small cut in between as seen above.

Once you’ve secured all Allen screws you can use the bundled covers as seen above.

The top end of the chair is now assembled so all that’s left is to place it onto the class-4 gaslift.