ASSEMBLY

 There are two ways to start assembling a chair so you can either choose to attach the seat onto the backrest and then the base or you can choose to start from the base by attaching the wheels like we do.

The larger the chair the larger the wheels used so since the Mezzo V2 is a medium sized one 60mm wheels will do fine.

Mounting the class-4 gaslift onto the base comes next (as always remember to check for a plastic cover and if the gaslift has one as seen above you need to remove it) followed by the placement of the plastic cover.

The seat of the Mezzo V2 features a single flat metal bar at the center (2 smaller ones on each end) and three elastic bands.

Each height adjustable armrest is held in place by a total of 4 Allen screws (8 in total).

Another 4 Allen screws are required to secure the butterfly mechanism onto the seat (these are already mounted on the seat so you will need to remove them, place the mechanism and use them to secure it in place).

The backrest has a single opening on each side along with two mounted Allen screws.

You will need to remove these screws and use them to secure the seat as seen above (after that just place the plastic covers and you’re done).

Having successfully assembled the top end of the chair all that’s left is to place it onto the class-4 gaslift.