ASSEMBLY

You may want to follow the instructions down to the letter and start from the seat but we always start by mounting the wheels onto the 5-star base as seen above.

65mm caster wheels may not be the largest we've seen to date but they are a lot better compared to 50mm ones.

After mounting the wheels we mount the class-4 gaslift with its plastic cover on the 5-star base.

Although the seat has a fabric cover at the base it's not hard to tell that it has 2 metal bars underneath along with a piece of wood.

Once again each 3D armrest is attached to the seat with no less than 4 Allen screws.

Mounting the butterfly mechanism onto the base requires a total of 4 Allen screws as seen above.

Mounting the backrest onto the seat requires using two Allen screws on each side.

After that you will need to place the plastic covers and the screw taps again as seen above.

With the upper body of the UC5 HEX Gaming Chair complete all that's left is to place it onto the class-4 gaslift.