THE SUW49DA

Typically, the first step is to attach the base to the stand with the bundled screws as seen above.

After that just slide the top of the stand into the rear of the screen as seen above.

Even with a curvature of 1800R this super ultra-wide screen is still massive in length.

As for numbers the SUW49DA stands roughly 466.02mm tall and 1178.4mm wide.

Viotek has once again used very narrow bezels for the top, left and right of the screen which are slightly less than 4mm.

On the other hand, the bottom bezel is quite thicker at around 19mm.

The company logo is printed on the middle of the bottom bezel and right beneath it we find the activity LEDs and the 5 screen buttons.

The height adjustable stand the one used with the SUW49DA has a lowest point of just 108mm and a highest point of 200mm.

The stand also supports tilt (5/-15 degrees) and swivel functions.

At the rear of the screen we find the company logo, some red glossy plastics and the cable management hole in the stand.

The available connectors are located behind a magnetic cover (2xHDMI/2xDP/1x3.5mm).

Although not very big the cable routing hole should be more than enough for most of the available connectors.