THE FI32DB

The FI32DB may not be a curved LCD screen but still with a diagonal of 80.1cm and a QHD 2560x1440p resolution it provides more than enough area/surface for most uses.

Mounting the 2 piece stand is easy, just attach them together and then onto the rear of the screen as seen above.

Afterwards you can also place the plastic cover over the VESA area as seen above (do keep in mind that the plastic is not very easy to remove once in place).

With the stand installed the FI32DB looks really nice, doesn't really stand out much (only its thickness does) but it looks nice regardless.

One more thing that stands out when looking at the FI32DB from the front is the thickness of its bezels.

To be precise the top, left and right bezels are just 10mm thick whereas the bottom one is almost 13mm thick.

Unfortunately, the stand is fixed (not height adjustable) and keeps the monitor roughly 77mm from the desk.

Moving at the rear we see a large company logo printed at the top.

The joystick menu button is also located here as are the power port, 2 HDMI ports, DP port, mini DP port, Dsub (VGA) port and the 3.5mm audio out.

You can also tilt the screen up to 15 degrees backwards and 5 degrees forward.