THE NUKI KEYPAD COMBO

The plastic/aluminum body of the Nuki Smart Lock 2.0 weighs just 460g and measures 11cm in length, 6cm in width and 6cm in depth.

At the top of the device, there’s an aluminum knob inside which Nuki has placed a LED activity ring and a button at the center (you can use either the button to lock/unlock the door or the aluminum knob which you turn like you would the key).

For good or bad the Nuki Smart Lock 2.0 doesn't feature a rechargeable battery pack, instead you need to use 4 LR6 batteries which are located at the base of the device as seen above.

The way the Nuki Smart Lock 2.0 works is rather simple, you just mount it on the rear of the door with the key on which is in turn placed inside the gap seen at the back of the device (the device simply turns the key left and right).

EU customers will be delighted to learn that the Nuki Smart Lock 2.0 can be mounted on most doors, this is why it comes with two separate metal mounts (one is for cylinders with at least 3mm overhang on the inside of the door and the other is for cylinder with less than 3mm).

The rubber coated keypad measures roughly 8.9cm in length, 2.7cm in width and 1.2cm in depth.

You have two ways to mount the keypad, either you use the already attached 3M double sided tape or the bundled screws.

Unlike the Smart Lock the keypad uses two button cells (CR2032).