THE CLCX 360

At first glance the CLCx 360 looks like yet another typical AIO liquid CPU cooler.

EVGA has placed their logo on both sides of the aluminum radiator (tiny details but i do like them).

The radiator is roughly 27mm thick so nothing we haven't seen many times in the past.

With an FPI (fins per inch) count of 21 this radiator should do well with the high-pressure fans included.

This time over we find 400mm long braided tubings which should be quite enough for even the largest cases out there.

On top of the pump, we see the EVGA logo and the LCD connector.

As it's typical for Asetek models the tubings rotate roughly 90 degrees from the base to simplify installation.

The hydraulic-bearing brushless fans can reach speeds of just over 2500RPM (2580RPM) to product up to 73.15CFM of airflow and 3.77-H2O of air pressure.

As expected, these fans feature anti-vibration rubber pads on all 4 corners.

With the fans installed the radiator measures just over 50mm in thickness.

All that's left is to mount the LCD screen on the pump.

As for the all-copper waterblock it's clearly large enough for modern CPUs (it also comes ready with a thin layer of thermal conductive material).