THE LIGHT LOOP 360

Aside the top of the pump everything else is something we've seen countless times in the past.

Once again, we see a 27mm thick aluminum radiator.

This particular radiator has an FPI (fins per inch) count of 19.

There are two ports on the radiator, fill/empty port which is not accessible by the user right next to the tubes and another one at the front which is actually meant to be accessed by the end user (covered with a sticker and I forgot to take a picture of).

The two 400mm braided tubes should be long enough for most PC cases out there.

As already mentioned right over the pump be quiet! has placed a frosted plastic with a total of 16 ARGB inside.

Just like previous be quiet! AIO models the Light Loop feature rotatable tubes for easier installation.

The nickel plated copper cold plate should be plenty for any consumer CPU model in the market.

Here you can see an exposed view of the pump/coldplate combo (marketing material).

The 3 Light Loop 120mm LX PWM fans can achieve speeds of up to 2100RPM to produce up to 61.8CFM of airflow and 2.51mmH2O of air pressure (these fans feature a total of 16 ARGB LEDs, 8 on each of the two rings).

Unfortunately, however these fans have no rubber pads on their corners.

With the fans mounted the Light Loop radiator increases to a thickness of almost 53mm.

The bundled ARGB fan hub has room for up to six fans and six 3-pin ARGB components.