THE ICEMYST 360

At first glance the IceMyst 360 doesn't really stand out compared to countless other models.

The radiator according to SilverStone is 28mm thick but as you can all see it's closer to 27mm (meaning the same as most AIOs in the market today).

FPI (fins per inch) count for this particular radiator is 19 (going to 20 but not quite).

A fill/drain port is placed next to the base of the tubes but as with other AIOs it's not something you should access.

The 460mm long tubes are braided and should be plenty for even the largest PC cases around.

SilverStone has placed their logo on top of the pump beneath which are the ARGB LEDs.

The top is not only rotatable (360 degrees) but it can also be removed to mount the IMF70-ARGB fans (one over the other).

Typically, the tubes have a 90 degree movement from the waterblock/pump combo.

This AIO uses a medium-sized cold plate which should be plenty for consumer CPUs both by Intel and AMD.

All three 120mm PWM ARGB fans used with the IceMyst 360 feature modular cable connectors and round rubber pads on every corner.

With the fans mounted radiator thickness jumps to around 52mm.

SilverStone send a total of 3 IMF70-ARGB fans with the IceMyst 360, so I'll be using them in this review.