THE HYPERFLOW 360 ARGB

Just like 90% of AIO liquid CPU coolers in the market at first glance the HyperFlow 360 ARGB doesn't really stand out.

The aluminum radiator is indeed roughly 27mm thick while the area with the fans is roughly 56mm thick.

All three fans are connected together from the factory, so you only need 1 motherboard header for power and 1 for ARGB.

The three Metal Pro 12 fans are not the fastest around but thanks to their specially designed fins they do produce higher air pressure than most.

An empty/fill port is located on the far right of the aluminum radiator (not to be used obviously).

According to Montech FPI (fins per inch) count for this radiator is 20 but it's more like 19 to 20.

The 400mm tubes may not be the longest used with an AIO but they should suffice for 90% of the builds out there.

At the top of the pump Montech has placed their name and of course several ARGB LEDs.

Typically, the tubes rotate from the waterblock end for about 80-90 degrees.

There's a pre-applied layer of thermal conductive material on the copper waterblock for faster mounting.

Beneath that layer there are no machine marks whatsoever (the waterblock is of good size).