THE LIQUID FREEZER III 360 A-RGB

Measuring 398mm in length, 120mm in width and 38mm in thickness the radiator of the Liquid Freezer III 360 A-RGB is among the largest ones used with AIO models.

Here you can see that the radiator is slightly thicker than just 38mm whereas with the fans it gets up to roughly 65mm.

In terms of FPI (fins per inch) this radiator comes to 16.

All three P12 PWM fans are pre-mounted and have their cables already routed as seen above.

The 450mm long braided EPDM (ethylene propylene diene monomer) tubes should be long enough for even the largest PC cases out there.

In order to prevent possible damage during shipping ARCTIC has removed the fan/ARGB part of the pump/waterblock.

ARCTIC as expected has placed their logo on top of the pump (keep in mind that because of the 60mm VRM fan the pump/waterblock combo is larger compared to other AIO models so it may have clearance issues with your M.2 SSD cooler - ARCTIC has a compatibility list online).

The tubes only rotate around 30 degrees from the pump end, but I had no issues while mounting the AIO.

Just like with its predecessor the coldplate may not be among the largest ones out there but it's adequate for the supported CPUs.