THE EISWAND 360

Alphacool bundles a 12v to 7v Molex power adapter for people who may wish for less noise coming from both the fans and pumps and i think it's worth pointing out since we don't see similar items a lot (still i'd prefer a button or a switch over it).

You can always choose to power the EISWAND 360 from your PSU using the bundled Molex to Molex cable but for our tests we used the external power supply which as you can see is manufactured by PHOBYA.

The XP3 Light waterblock is the 3rd best in the Alphacool line (after the XPX and XP3 models) and features an all-copper base with an acetal top.

The all-copper base is polished and only has but a few machine marks.

From the above picture you can all see the cross-slotted design and backflow channels of the all-copper base.

Here we see the 535mm tall, 210mm wide and 150mm deep aluminum tower of the EISWAND 360.

Alphacool has placed EVA insulation on both sides of the tower so although this will probably reduce airflow levels it should keep dust outside (the only question is how easy will it be to remove that dust).

The company logo is placed on the lower end of the tower (both sides - illuminated).

At the top of the tower we find the mid-size reservoir which can be filled through a G1/4" port.

Although the base of the EISWAND 360 tower is 150mm from one end to the other the main body is actually just 110mm thick.

The base features a rubber like material and is illuminated (blue LEDs).

At the rear of the tower we find the IN and OUT G1/4" ports and the Molex power connector.

The base sits ontop of 4 removable round feet.