BUILDING THE SYSTEM

As always the purpose of this section is not to build a functional system but rather to showcase what you can expect from the case at hand in terms of interior space.

For this review i used our typical ASRock A330ION mainboard which as you can see leaves plenty of room around it inside the case.

The 9800GT Green Edition by Gainward can't come even close to the 317.5mm the ISK 600 leaves for graphics cards.

Here we see how the system looks when there are also 3 HDDs installed at the top caddies.

As you can see although the PSU area is at the front you only need to plug this cable into your PSU to connect it with the rear power port.

Of course i do recommend using an modular PSU (fully modular if possible) since as expected the ISK 600 doesn't have room for cable management.