THE CORE P5

The Core P5 is by no means a small PC case since it measures 608mm in height, 570mm in depth and 333mm in width (with the acrylic panel attached).

The I/O panel is located at the front of the case and includes the power on/off and reset buttons, power and HDD activity LEDs, two USB 3.0 ports, two USB 2.0 ports and the typical microphone and headphone ports.

Installing components on the Core P5 should be very easy since just by taking a quick look from the front we see the 5 rubber grommets used for cable management, CPU cutout for mounting of backplates, PSU area and the fan/radiator mounting spots.

Taking a look at the rear of the case we see the wall mounting holes (there's a long magnetic air-filter behind the perforated area used to keep the rear of the radiator and/or fans clean).

You will need to remove the rear panel to access the interior of the case.

Here we find three 2.5/3.5" trays which are quite sturdy and easy to use since you just need to remove the side clips, place the drive inside and push them back in again (2.5" drives require screws however).

This is what holds the entire case if you decide to opt for the wall mounting feature (standard VESA mounts with 200/100/75mm horizontal and 100/75mm vertical distance - wall mounting brackets however are not included in the package).